Emergency Lighting Test Unit Kit
 
It is a mandatory legislative requirement that any building or structure that has an emergency evacuation lighting system installed be regularly inspected and maintained in accordance with the requirements of AS/NZS 2293.2
 
This standard sets out the periodic inspection and maintenance procedures which are necessary to ensure that the emergency evacuation lighting system will be in a state of readiness for operation at all times and this maintenance & inspection work only be carried out by persons with suitable qualifications and experience.

Unit discharge tests shall be carried out at six monthly intervals by simulating a mains failure. All luminaires and exit signs shall remain illuminated for the full duration of this discharge test. Any luminaire with a battery that cannot sustain illumination for the full duration of the test shall have this battery replaced and when fully charged retested.
 

Features:

  • Control single point systems
  • Manual or automatic reset
  • Simulate supply failure to exit signs in accordance with AS/NZS 2293.2

Technical Data:

Description: Emergency lighting test switch (enclosed)
Operation: Rotary selector switch operation
Dimensions: 160 x 122 x 85 (mm)
Operating Voltage: 230V AC ± 5%, 50/60Hz
Cable entry: 4mm²
Contactor: 4 pole, 25A NC
Time Delay: Fully programmable
Operating Temperature: 5 to 50°C
IP Rating: IP20

 

***This product must be installed by a licensed electrician***

(3A-EMTK)

SKU 3A-EMTK
Barcode # 9354506003609
Brand 3A AU

More From This Category